Direction For Use
Welding Torch
Spray Anti-Spatter liquid before welding in a thin and uniform film onto the areas to be protected. Hold spray can approximately 30 cm from the surface to be protected. Also use the spray to protect the interior and exterior of nozzles, the end and outer surface of contact tips, and all other potential areas which are subject to weld spatter. It may be advisable to spray diffusers and the base of the nozzle support as well.
Base Metal
Spray Anti-Spatter liquid hold spray can approximately 30cm from surface to be protected. Spray a thin uniform coating. Do not over apply solution as excessive solution application may be detrimental to the weld quality.
Application Methods
Hand held spray applicator for welding torch components and base metal areas.Wiping and mopping may be used for base metal large areas.
NOTE
To remove Anti-Spatter liquid after use, clean the surface with Prosol Solvent Degreaser or equivalent steel compatible degreaser.
CAUTION
Avoid contact with eyes. Used in a well ventilated area.
Avoid prolonged skin contact (>24 hours).
| DESCRIPTION |
|---|
| ANTI-SPATTER NOZZEL & SHIELD |
![pptEF58.pptm - AutoRecovered [Autosaved] [Autosaved]](https://chemtools.com.my/wp-content/uploads/2024/08/pptEF58.pptm-AutoRecovered-Autosaved-Autosaved-31-e1724388989705.png)



















